Control 88M
Giá : 12.500.000 VNĐ
Loa sân vườn, ngoài trời Mushroom Landscape, 2 đường tiếng, đồng trục.Được thiết kế cho các ứng dụng ngoài trời, Series 80 Landscape Lenses chịu được thời tiết cao. cung cấp chất lượng âm thanh toàn dải tuyệt vời và độ bao phủ 360 độ. Được thiết kế để gắn trên hoặc dưới mặt đất, loa Control 80 được sử dụng trong nhiều ứng dụng bao gồm trung tâm mua sắm, công viên giải trí, địa điểm thể thao, khách sạn, sòng bạc, và cần có nhạc nền chất lượng tốt . Thiết kế nhỏ gọn, loa không phô trương và dễ dàng hòa trộn với môi trường xung quanh. Vỏ bọc bằng polyetylen chống lại sự lạm dụng từ việc chăm sóc thiết bị và các thiết bị bổ sung, và màu vỏ bao quanh toàn bộ vật liệu để loa sẽ duy trì màu ngay cả khi bị cào hoặc trầy xước.
JBL Mushroom Landscape Series 80
Loa 8 in chịu được thời tiết cao
Loa tweeter dome mềm chịu được thời tiết cao
Công suất 120W Pink Noise Power (chương trình 240W) trong cài đặt 8 Ohm , cộng với biến áp đa điểm 60W 70V / 100V tích hợp
Vỏ nhựa chịu được thời tiết cao
Buồng trung tâm cách ly hoàn toàn để bảo vệ hệ thống dây điện
Âm thanh độ trung thực cao với dải tần số rộng từ 47Hz - 16kHz
Frequency Response (-10dB) 47 Hz – 16 kHz
Power Rating:
240 W Continuous Program (2 hrs)
120W (480W peak), Continuous Pink Noise (2 hrs)
100W (400W peak) Continuous Pink Noise (100 hrs)
Transformer Taps
70V: 60W, 30W, 15W & 7.5W
100V: 60W, 30W, 15W
Frequency Response (±3 dB) 60Hz - 15 kHz
Maximum Input Voltage 28.0 V
Sensitivity 87 dB, 1W @ 1m (ave. 80Hz - 16kHz)
•Nominal Coverage Angle 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
•Directivity (Q) 2.1
•Directivity Index (DI) 3.2 dB
•Rated Maximum SPL 108 dB @ 1m
•Nominal Impedance 8Ω (at 8Ω setting)
•Minimum Impedance 6.6Ω at 9.5kHz
•Insertion Loss <0.5 dB at any tap setting
•Thru Setting 8Ω nominal
•Crossover Type 2nd Order LPF on LF and 2nd Order HPF on HF
•Recommended Protective High-Pass 45 Hz for 8Ω operation, 24 dB/oct
•80 Hz for 60W tap, 24 dB/oct
•50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct
•Low Frequency Driver 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.
•High Frequency 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.
•Enclosure Material LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
•Grille Powder coated stainless steel.
•Environmental IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
•Agency Ratings UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
•Terminals Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
•Wiring Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS).
•Colors Hunter Green, RAL6018
•Dimensions (H x W x D) 524 x 355 x 355 mm (20.7 x 14 x 14 in.)
•Net Weight 7.8 kg (17 lb)
•Shipping Weight 10.5 kg (23 lb)
•Included Accessories (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
•Installer-Supplied Required Tools 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.